**Skoda Rapid VCDS Mods: What You Need to Know Before You Start?**

Skoda Rapid Vcds Mods can significantly enhance your car’s functionality and personalization, but navigating the complexities of modern automotive coding requires expert assistance. At CAR-CODING.EDU.VN, we offer reliable and secure remote support for all your Skoda Rapid coding needs. Our expert guidance ensures safe ECU programming, feature activation, and comprehensive technical support, allowing technicians and shop owners to expand their service capabilities without risking costly errors.

1. What are Skoda Rapid VCDS Mods and Why are They Popular?

Skoda Rapid VCDS mods involve using a diagnostic tool like VCDS (Vag-Com Diagnostic System) to modify the software settings within your car’s electronic control units (ECUs). These modifications can unlock hidden features, customize vehicle behavior, and enhance overall driving experience. The popularity of VCDS mods stems from their ability to personalize a car to individual preferences and needs, often unlocking functionalities that were either disabled by default or available only in higher-end models.

1.1. Understanding the Basics of VCDS Coding

VCDS coding allows you to change the way your Skoda Rapid’s various systems operate. This includes adjusting parameters for lighting, comfort features, driver assistance systems, and more. The process involves accessing specific modules within the car’s ECU and altering the coding values to achieve the desired effect. Proper understanding and precise execution are crucial to avoid unintended consequences.

1.2. Common Skoda Rapid VCDS Modifications

Several popular VCDS modifications can enhance your Skoda Rapid. These include:

• Coming Home/Leaving Home Lights: Automatically activates headlights when unlocking or locking the car in low-light conditions.
• Cornering Fog Lights: Turns on the fog lights on the side you’re turning towards to improve visibility.
• Gauge Needle Sweep (Staging): Sweeps the instrument cluster needles upon startup for a sporty look.
• Emergency Brake Flashing: Activates hazard lights under hard braking to warn other drivers.
• Comfort Turn Signals: Increases the number of flashes for turn signals with a single tap.
• Disable Seat Belt Warning: Disables the audible seat belt warning (use with caution and responsibility).
• Rain Closing: Automatically closes the windows and sunroof if rain is detected while the car is parked.

1.3. Benefits of VCDS Mods

VCDS mods offer numerous benefits, including:

• Personalization: Tailor your car’s features to your specific preferences.
• Enhanced Functionality: Unlock hidden features and improve the usability of your car.
• Improved Safety: Activate safety features like emergency brake flashing.
• Aesthetic Enhancements: Customize the look of your car with features like gauge needle sweep.
• Cost Savings: Enable features without needing to purchase expensive upgrades or higher-trim models.

1.4. What are the Risks Associated with VCDS Mods?

While VCDS mods offer many benefits, they also come with potential risks:

• ECU Damage: Incorrect coding can lead to malfunctioning systems or even permanent damage to the ECU.
• Warranty Issues: Unauthorized modifications may void your car’s warranty.
• System Instability: Incompatible settings can cause unpredictable behavior in your car’s systems.
• Safety Concerns: Improperly configured safety features can compromise your safety.
• Software Glitches: Coding errors can lead to software glitches and error codes.

1.5. Why Professional Support is Essential for VCDS Mods

Given the complexities and potential risks, professional support is essential for performing VCDS mods safely and effectively. CAR-CODING.EDU.VN provides expert remote assistance to guide you through the coding process, ensuring that all modifications are performed correctly and without compromising your car’s integrity. Our experienced technicians can help you avoid common pitfalls and achieve the desired results with confidence.

2. How to Safely Perform Skoda Rapid VCDS Mods

Safely performing Skoda Rapid VCDS mods requires careful planning, the right tools, and a thorough understanding of the coding process. Following a structured approach and seeking professional guidance can significantly reduce the risk of errors and ensure a successful outcome.

2.1. Essential Tools and Software

To perform VCDS mods, you’ll need the following tools and software:

• VCDS Diagnostic Tool: A genuine VCDS cable and software from Ross-Tech are essential for reliable coding.
• Laptop: A Windows-based laptop to run the VCDS software.
• Battery Charger: To maintain a stable voltage during coding.
• Internet Connection: For accessing online resources and remote support.

2.2. Step-by-Step Guide to VCDS Coding

Here’s a step-by-step guide to performing VCDS coding:

1. Connect the VCDS Cable: Plug the VCDS cable into your car’s OBD-II port and connect it to your laptop.
2. Launch VCDS Software: Open the VCDS software on your laptop.
3. Select Control Module: Choose the specific control module you want to modify (e.g., Central Electronics, Comfort System).
4. Access Coding: Enter the coding section of the module.
5. Record Original Coding: Before making any changes, record the original coding value in case you need to revert.
6. Make Changes: Modify the coding value according to the desired modification.
7. Save Changes: Save the new coding value.
8. Test the Changes: Verify that the modification works as expected.
9. Clear Fault Codes: Clear any fault codes that may have been generated during the process.

2.3. Best Practices for Safe VCDS Coding

Follow these best practices to ensure safe VCDS coding:

• Always Back Up Original Coding: Before making any changes, always back up the original coding value.
• Use a Battery Charger: Maintain a stable voltage during coding to prevent errors.
• Follow Reliable Guides: Use reliable and well-documented guides for each modification.
• Double-Check Coding Values: Double-check all coding values before saving changes.
• Test Thoroughly: Test the changes thoroughly after saving to ensure they work as expected.
• Clear Fault Codes: Clear any fault codes that may have been generated during the process.
• Seek Professional Help: If you’re unsure about any step, seek professional help from CAR-CODING.EDU.VN.

2.4. How to Avoid Common Coding Mistakes

Avoiding common coding mistakes is crucial to prevent issues:

• Research Thoroughly: Understand the purpose of each coding value before making changes.
• Use Reliable Resources: Rely on trusted sources for coding information.
• Don’t Guess: Never guess or experiment with coding values without proper knowledge.
• Be Patient: Take your time and be patient during the coding process.
• Stay Organized: Keep track of the changes you make and the original coding values.

2.5. Troubleshooting Common VCDS Issues

If you encounter issues during VCDS coding, try these troubleshooting steps:

• Check Connections: Ensure that the VCDS cable is properly connected to your car and laptop.
• Restart Software: Restart the VCDS software and try again.
• Check Battery Voltage: Make sure your car’s battery has sufficient voltage.
• Clear Fault Codes: Clear any fault codes that may be preventing the coding process.
• Revert to Original Coding: If you’re unable to resolve the issue, revert to the original coding value.

3. The Benefits of Remote Automotive Coding Support

Remote automotive coding support offers numerous advantages over traditional methods, providing convenient, efficient, and expert assistance for all your coding needs. With CAR-CODING.EDU.VN, you can access professional support from the comfort of your own garage or workshop.

3.1. What is Remote Car Coding Assistance?

Remote car coding assistance involves connecting to your car’s ECU remotely and performing coding modifications using specialized software and diagnostic tools. This allows experienced technicians to guide you through the coding process in real-time, providing step-by-step instructions and troubleshooting any issues that may arise.

3.2. Advantages of Remote Support

Remote support offers several key advantages:

• Convenience: Access expert assistance from anywhere with an internet connection.
• Efficiency: Resolve coding issues quickly and efficiently without the need for on-site visits.
• Expertise: Benefit from the knowledge and experience of skilled technicians.
• Safety: Ensure that all modifications are performed correctly and without compromising your car’s integrity.
• Cost-Effective: Save time and money compared to traditional coding methods.

3.3. How CAR-CODING.EDU.VN Provides Remote Support

CAR-CODING.EDU.VN provides remote support through a secure and reliable connection to your car’s ECU. Our technicians use advanced diagnostic tools and software to access your car’s systems, perform coding modifications, and troubleshoot any issues. We offer a range of remote support services, including:

• Coding and Programming: Assisting with coding and programming various modules in your car’s ECU.
• Feature Activation: Helping you activate hidden features and customize your car’s behavior.
• Fault Code Clearing: Clearing fault codes and resolving software glitches.
• Technical Support: Providing expert advice and troubleshooting for coding-related issues.

3.4. Required Equipment for Remote Assistance

To receive remote assistance from CAR-CODING.EDU.VN, you’ll need the following equipment:

• VCDS Diagnostic Tool: A genuine VCDS cable and software from Ross-Tech are essential for reliable coding.
• Laptop: A Windows-based laptop to run the VCDS software.
• Internet Connection: A stable internet connection for remote access.
• TeamViewer or Anydesk: Remote desktop software for screen sharing and remote control.

3.5. Step-by-Step Process of Receiving Remote Support

Here’s the step-by-step process of receiving remote support from CAR-CODING.EDU.VN:

1. Contact Us: Reach out to us via Whatsapp at +1 (641) 206-8880 or visit our website at CAR-CODING.EDU.VN to schedule a remote support session.
2. Connect VCDS: Connect the VCDS cable to your car’s OBD-II port and your laptop.
3. Install Remote Software: Install TeamViewer or Anydesk on your laptop.
4. Share Your Credentials: Provide our technician with your TeamViewer or Anydesk credentials.
5. Grant Access: Grant our technician access to your laptop.
6. Follow Instructions: Follow our technician’s instructions to perform the coding modifications.
7. Test the Changes: Verify that the modifications work as expected.

4. Understanding ECU Programming for Skoda Rapid

ECU programming, also known as flashing, involves updating or replacing the software in your car’s ECU. This process can be used to improve performance, fix software bugs, or enable new features. Understanding the basics of ECU programming is essential for performing these modifications safely and effectively.

4.1. What is ECU Programming/Flashing?

ECU programming, or flashing, is the process of rewriting the software code within your car’s Engine Control Unit (ECU). This can involve updating the existing software to a newer version, replacing the entire software with a modified version, or installing custom software designed for specific performance enhancements.

4.2. When is ECU Programming Necessary?

ECU programming may be necessary in several situations:

• Software Updates: To install the latest software updates from the manufacturer.
• Performance Tuning: To optimize engine performance for increased power and efficiency.
• Bug Fixes: To resolve software bugs and glitches.
• Feature Enhancements: To enable new features and functionalities.
• ECU Replacement: To program a new or replacement ECU.

4.3. Tools and Software Required for ECU Programming

To perform ECU programming, you’ll need the following tools and software:

• ECU Programming Tool: A specialized ECU programming tool, such as Autel, Galletto, or KESS.
• Laptop: A Windows-based laptop to run the programming software.
• Battery Charger: To maintain a stable voltage during programming.
• ECU Software Files: The correct software files for your car’s ECU.

4.4. The ECU Programming Process

Here’s a general overview of the ECU programming process:

1. Connect the Programming Tool: Connect the ECU programming tool to your car’s OBD-II port and your laptop.
2. Launch Programming Software: Open the programming software on your laptop.
3. Identify the ECU: Identify the ECU you want to program.
4. Select Software File: Choose the correct software file for your ECU.
5. Start Programming: Start the programming process.
6. Wait for Completion: Wait for the programming process to complete.
7. Verify Programming: Verify that the programming was successful.
8. Test the Car: Test the car to ensure that everything is working correctly.

4.5. Risks and Precautions

ECU programming is a complex process with potential risks:

• ECU Damage: Incorrect programming can damage the ECU.
• Software Corruption: Programming errors can corrupt the ECU software.
• Warranty Issues: Unauthorized programming may void your car’s warranty.

To mitigate these risks, follow these precautions:

• Use the Correct Tools and Software: Use the correct tools and software for your car’s ECU.
• Follow Instructions Carefully: Follow the programming instructions carefully.
• Maintain Stable Voltage: Maintain a stable voltage during programming.
• Back Up Original Software: Back up the original ECU software before programming.
• Seek Professional Help: If you’re unsure about any step, seek professional help from CAR-CODING.EDU.VN.

5. Clearing Fault Codes Permanently

Clearing fault codes is an essential part of automotive diagnostics and repair. Fault codes can indicate various issues with your car’s systems, and clearing them after addressing the underlying problems is crucial for proper operation. However, some fault codes may reappear if the root cause is not resolved.

5.1. Understanding Fault Codes

Fault codes are diagnostic trouble codes (DTCs) generated by your car’s ECU to indicate a problem with a specific system or component. These codes are stored in the ECU’s memory and can be retrieved using a diagnostic tool like VCDS.

5.2. Common Reasons for Fault Codes

Common reasons for fault codes include:

• Sensor Malfunctions: Faulty sensors can generate inaccurate readings and trigger fault codes.
• Wiring Issues: Damaged or corroded wiring can cause electrical problems and fault codes.
• Component Failures: Failed components, such as actuators or solenoids, can trigger fault codes.
• Software Glitches: Software bugs and glitches can generate false fault codes.
• Low Battery Voltage: Low battery voltage can cause various electrical problems and fault codes.

5.3. How to Clear Fault Codes with VCDS

To clear fault codes with VCDS, follow these steps:

1. Connect the VCDS Cable: Plug the VCDS cable into your car’s OBD-II port and connect it to your laptop.
2. Launch VCDS Software: Open the VCDS software on your laptop.
3. Select Control Module: Choose the specific control module you want to diagnose.
4. Access Fault Codes: Enter the fault code section of the module.
5. Read Fault Codes: Read the stored fault codes.
6. Clear Fault Codes: Clear the fault codes.
7. Verify Clearing: Verify that the fault codes have been cleared.

5.4. Why Some Fault Codes Reappear

Some fault codes may reappear even after being cleared. This can happen if the underlying issue has not been resolved or if the fault code is caused by an intermittent problem.

5.5. Steps to Permanently Clear Fault Codes

To permanently clear fault codes, follow these steps:

1. Diagnose the Underlying Issue: Identify and resolve the root cause of the fault code.
2. Repair or Replace Faulty Components: Repair or replace any faulty components that are causing the fault code.
3. Check Wiring and Connections: Check the wiring and connections related to the fault code for damage or corrosion.
4. Update ECU Software: Update the ECU software to the latest version to resolve any software bugs.
5. Clear the Fault Codes: Clear the fault codes using VCDS.
6. Test the Car: Test the car to ensure that the fault codes do not reappear.

6. Specific Skoda Rapid VCDS Mods

Skoda Rapid offers a range of VCDS mods to enhance functionality and personalization. Here’s an overview of some popular mods:

6.1. Lighting Modifications

Lighting modifications can improve visibility and aesthetics. Examples include:

• Coming Home/Leaving Home Lights: Automatically activates headlights when unlocking or locking the car in low-light conditions.
• Cornering Fog Lights: Turns on the fog lights on the side you’re turning towards to improve visibility.
• Daytime Running Lights (DRL) Brightness Adjustment: Adjusts the brightness of the daytime running lights.
• Strobe Brake Lights: Modifies brake lights to flash rapidly under hard braking.

6.2. Comfort and Convenience Modifications

Comfort and convenience modifications enhance the driving experience. Examples include:

• Comfort Turn Signals: Increases the number of flashes for turn signals with a single tap.
• Rain Closing: Automatically closes the windows and sunroof if rain is detected while the car is parked.
• Remote Window Operation: Allows you to open and close the windows using the remote key.
• Automatic Door Locking: Automatically locks the doors when the car reaches a certain speed.

6.3. Instrument Cluster Modifications

Instrument cluster modifications can customize the look and feel of the instrument panel. Examples include:

• Gauge Needle Sweep (Staging): Sweeps the instrument cluster needles upon startup for a sporty look.
• Fuel Consumption Correction: Calibrates the fuel consumption display for accuracy.
• Displaying Oil Temperature: Displays the oil temperature in the instrument cluster.

6.4. Safety and Security Modifications

Safety and security modifications enhance the safety features of your car. Examples include:

• Emergency Brake Flashing: Activates hazard lights under hard braking to warn other drivers.
• Anti-Theft System Customization: Customizes the behavior of the anti-theft system.
• Seat Belt Warning Customization: Customizes the seat belt warning chime and display.

6.5. Other Modifications

Other modifications can further personalize your Skoda Rapid. Examples include:

• Start-Stop System Customization: Customizes the behavior of the start-stop system.
• Soundaktor Adjustment: Adjusts the volume of the soundaktor (engine sound enhancer).
• Throttle Response Adjustment: Adjusts the throttle response for a sportier feel.

7. How to Choose the Right VCDS Tweaker

Choosing the right VCDS tweaker is crucial for ensuring safe and effective modifications. Here’s how to find a reliable and experienced professional:

7.1. Importance of Choosing a Qualified Professional

A qualified professional can provide expert guidance, perform modifications safely, and troubleshoot any issues that may arise. Choosing an unqualified tweaker can lead to ECU damage, system instability, and warranty issues.

7.2. Factors to Consider

When choosing a VCDS tweaker, consider the following factors:

• Experience: Look for a tweaker with extensive experience in VCDS coding and ECU programming.
• Reputation: Check the tweaker’s reputation by reading online reviews and testimonials.
• Knowledge: Ensure that the tweaker has a thorough understanding of VCDS coding and your car’s systems.
• Tools and Equipment: Verify that the tweaker uses genuine VCDS tools and equipment.
• Support: Choose a tweaker who offers ongoing support and troubleshooting.

7.3. Questions to Ask Potential Tweakers

Ask potential tweakers the following questions:

• What is your experience with VCDS coding?
• Have you worked on Skoda Rapid models before?
• What is your process for backing up original coding?
• What tools and equipment do you use?
• Do you offer support after the modifications are performed?
• What are your rates?

7.4. Red Flags to Watch Out For

Watch out for the following red flags:

• Lack of Experience: Tweakers with limited experience may not be able to perform modifications safely and effectively.
• Poor Reputation: Negative reviews and testimonials can indicate a lack of professionalism and expertise.
• Unwillingness to Provide Information: Tweakers who are unwilling to provide information about their experience and process may not be trustworthy.
• Using Pirated Tools: Tweakers who use pirated VCDS tools may compromise the safety and reliability of your car’s systems.
• Unrealistic Promises: Tweakers who make unrealistic promises may not be able to deliver the desired results.

7.5. Why Choose CAR-CODING.EDU.VN

CAR-CODING.EDU.VN offers a comprehensive and reliable solution for all your VCDS coding and ECU programming needs. Our experienced technicians provide expert remote assistance, ensuring that all modifications are performed safely and effectively. We use genuine VCDS tools and software, follow best practices, and offer ongoing support to our customers.

8. Legal and Warranty Considerations

Before performing any VCDS mods or ECU programming, it’s important to consider the legal and warranty implications. Unauthorized modifications may void your car’s warranty and may not be legal in your jurisdiction.

8.1. Warranty Implications

Unauthorized VCDS mods and ECU programming may void your car’s warranty. Manufacturers may deny warranty claims if they determine that the modifications have caused damage to your car’s systems.

8.2. Legal Considerations

Some VCDS mods may not be legal in your jurisdiction. For example, modifications that affect safety systems or emissions may violate local laws and regulations.

8.3. How to Ensure Compliance

To ensure compliance with warranty and legal requirements, follow these steps:

• Check Your Warranty: Review your car’s warranty to determine which modifications are allowed.
• Research Local Laws: Research local laws and regulations to ensure that the modifications are legal in your jurisdiction.
• Use Approved Modifications: Use only approved VCDS mods and ECU programming techniques.
• Document All Changes: Document all VCDS mods and ECU programming changes.
• Consult with a Professional: Consult with a professional, such as CAR-CODING.EDU.VN, to ensure that the modifications are safe and legal.

8.4. Maintaining Records of Modifications

Maintaining records of all VCDS mods and ECU programming changes can help you demonstrate compliance with warranty and legal requirements. Keep a log of all modifications, including the date, description, and coding values.

8.5. Potential Impact on Insurance

VCDS mods and ECU programming may also impact your car insurance. Some insurance companies may deny coverage if they determine that the modifications have increased the risk of accidents or theft.

9. The Future of Car Coding

Car coding is a rapidly evolving field, with new technologies and techniques emerging all the time. Understanding the future trends in car coding can help you stay ahead of the curve and prepare for the challenges and opportunities that lie ahead.

9.1. Trends in Automotive Technology

Several key trends are shaping the future of automotive technology:

• Electric Vehicles (EVs): EVs are becoming increasingly popular, and car coding is playing a crucial role in optimizing their performance and efficiency.
• Autonomous Driving: Autonomous driving technology is advancing rapidly, and car coding is essential for enabling these systems.
• Over-the-Air (OTA) Updates: OTA updates are becoming more common, allowing manufacturers to remotely update car software and add new features.
• Cybersecurity: Cybersecurity is becoming increasingly important, as cars are more connected and vulnerable to hacking.

9.2. The Role of Car Coding in Future Vehicles

Car coding will play an even more critical role in future vehicles:

• Customization: Car coding will allow drivers to customize their cars to an unprecedented degree.
• Performance Optimization: Car coding will enable performance optimization for EVs and other advanced vehicles.
• Feature Enhancement: Car coding will allow drivers to add new features and functionalities to their cars.
• Cybersecurity Protection: Car coding will play a role in protecting cars from cyberattacks.

9.3. Advancements in Coding Tools and Techniques

Advancements in coding tools and techniques are making car coding easier and more accessible:

• User-Friendly Interfaces: Coding tools are becoming more user-friendly, making it easier for drivers to perform modifications.
• Cloud-Based Coding: Cloud-based coding platforms are emerging, allowing drivers to code their cars remotely.
• Artificial Intelligence (AI): AI is being used to automate the coding process and identify potential issues.

9.4. Training and Education for Car Coding Professionals

Training and education are essential for car coding professionals to stay up-to-date with the latest technologies and techniques:

• Online Courses: Online courses provide a convenient way to learn about car coding.
• Workshops: Workshops offer hands-on training in car coding techniques.
• Certifications: Certifications demonstrate competence in car coding.

9.5. The Importance of Staying Informed

Staying informed about the latest trends and developments in car coding is crucial for both professionals and enthusiasts. Follow industry news, attend conferences, and participate in online forums to stay up-to-date.

10. FAQ: Skoda Rapid VCDS Mods

10.1. Is VCDS coding safe for my Skoda Rapid?

VCDS coding is generally safe if performed correctly with the right tools, accurate information, and a thorough understanding of the process. However, incorrect coding can lead to ECU damage or system malfunctions. Professional assistance from CAR-CODING.EDU.VN can ensure a safe and successful coding experience.

10.2. How does remote support for Skoda Rapid VCDS mods work?

Remote support involves connecting to your car’s ECU remotely using specialized software and diagnostic tools. Our technicians at CAR-CODING.EDU.VN guide you through the coding process in real-time, providing step-by-step instructions and troubleshooting any issues.

10.3. What is the cost of remote VCDS coding assistance for Skoda Rapid?

The cost of remote VCDS coding assistance varies depending on the complexity of the modifications and the time required. Contact CAR-CODING.EDU.VN for a personalized quote based on your specific needs.

10.4. What types of Skoda Rapid vehicles and features are supported?

CAR-CODING.EDU.VN supports a wide range of Skoda Rapid models and features, including lighting modifications, comfort and convenience enhancements, instrument cluster customizations, and safety system adjustments. Contact us to confirm compatibility with your specific vehicle and desired modifications.

10.5. What equipment do I need to receive remote VCDS coding support?

To receive remote VCDS coding support, you’ll need a genuine VCDS cable and software, a Windows-based laptop, a stable internet connection, and remote desktop software like TeamViewer or Anydesk.

10.6. Can VCDS coding void my Skoda Rapid’s warranty?

Unauthorized VCDS coding may void your car’s warranty. Check your warranty terms and consult with a professional before making any modifications. CAR-CODING.EDU.VN can advise on modifications that are less likely to affect your warranty.

10.7. How long does a remote VCDS coding session typically take?

The duration of a remote VCDS coding session varies depending on the complexity of the modifications. Simple coding changes may take as little as 30 minutes, while more complex modifications can take several hours.

10.8. What happens if something goes wrong during the coding process?

If something goes wrong during the coding process, our technicians at CAR-CODING.EDU.VN can help you troubleshoot the issue and revert to the original coding values if necessary. We take every precaution to ensure a safe and successful coding experience.

10.9. How do I schedule a remote VCDS coding session with CAR-CODING.EDU.VN?

To schedule a remote VCDS coding session, contact us via Whatsapp at +1 (641) 206-8880 or visit our website at CAR-CODING.EDU.VN. Our team will assist you in setting up an appointment.

10.10. Can you help me activate hidden features on my Skoda Rapid?

Yes, CAR-CODING.EDU.VN can help you activate hidden features on your Skoda Rapid. Our technicians are experienced in unlocking various functionalities, such as coming home/leaving home lights, cornering fog lights, and gauge needle sweep.

Skoda Rapid VCDS mods offer a powerful way to personalize and enhance your vehicle. However, the complexities of modern automotive coding require expert assistance to ensure safety and effectiveness. CAR-CODING.EDU.VN provides professional remote support for all your Skoda Rapid coding needs. Contact us today at +1 (641) 206-8880 or visit CAR-CODING.EDU.VN to schedule a remote support session and experience the benefits of expert guidance. Our office is located at 100 Tech Innovation Dr, Suite 500, San Jose, CA 95110, United States.